Peter Curran Electric, Galway. Electrical and Lighting Suppliers.

Order by New Products in Our Store

Bulkhead Self- Adhesive Legend

29.99 EUR
Add to Cart
Bulkhead Self- Adhesive Legend
Read more »

8W Maintained with Test Switch

Please Enquire EUR
Add to Cart
8W Maintained with Test Switch
  C/w T5 tube
  3 hour duration, with NiCd rechargeable battery
  White polycarbonate housing & diffuser - impact resistant
  Self Adhesive running men available (RBULKLEG)
  IP65 ingress protection - weatherproof
  UV protected
  Can be maintained or non-maintained
  With local test switch
Read more »

8W Maintained Emergency Bulkhead, including white & chrome accessory plates

Please Enquire EUR
Add to Cart
8W Maintained Emergency Bulkhead, including white & chrome accessory plates
  Fully flush mounted maintained luminaire
  Complete with opal diffuser
  White bezel rim as standard. Chrome bezel accessory also included
  Flush unobtrusive design for discreet emergency lighting
  For 3 hour emergency use, maintained or non maintained (can be wired as non maintained)
  Includes large terminals for loop in loop out
  High frequency inverter (maintained 30-40khz, non maintained 20-30khz)
  IP20 - for indoor use
  Complete with charging LED indicator
Read more »

IP65 8W Maintained c/w lamp, white

Please Enquire EUR
Add to Cart
IP65 8W Maintained c/w lamp, white
  C/w T5 8W lamp
  3 hr duration, with NiCd rechargeable battery
  White polycarbonate (PC) housing and diffuser - Impact resistant
  Self adhesive running men available as extra for exit box application (Product code RBULKLEG)
  IP65 ingress protection, suitable for indoor & outdoor use - weather proof
  UV protected
Read more »

LED Blade Light Exit Sign (White)

Please Enquire EUR
Add to Cart
LED Blade Light Exit Sign (White)
  Permanently maintained emergency exit sign illuminated by 8 LEDs
  3hr NiCd battery back up
  LEDs enclosed on linear PCB
  Supported by adjustable cables
  Visible up to 36m
  50000hr lamp life
  15 lumens
  Surface or semi-recessed use
  C/w ceiling mounting clips
Read more »

Conversion kit for 3 x 3W downlight (RF33LEDWWK)

Please Enquire EUR
Add to Cart
Conversion kit for 3 x 3W downlight (RF33LEDWWK)
  Converts RF33LEDWWK to an emergency fitting
  Complete with male-female quick fix battery and fitting connection, battery bag and green LED charging indicator
  Only 1 x 3W LED in use during emergency operation
  No driver required when using this pack
Read more »

1 x 3W Non-maintained Downlight Adjustable Emergency

Please Enquire EUR
Add to Cart
1 x 3W Non-maintained Downlight Adjustable Emergency
  3W LED with high lumen output
  20 degree adjustable head, light can be directed to desired area
  3 Hour emergency operation
  Single spring retention clips for easy installation
  Small compact fitting
  C/w 3 cell NiMH battery and green charging LED indicator
Read more »

Motion Detector 180degree PIR (Black)

Please Enquire EUR
Add to Cart
Motion Detector 180degree PIR (Black)
  Manual override facility, with automatic re-set after 8 hrs
  Weatherproof housing - injection moulded ABS
  180? detection
  Adjustable time delay (10 secs - 4 mins)
  Max 1000W tungsten or 300W fluorescent
  Light sensitivity: 30 lux adjustable
  Minimum load 25W
Read more »

Motion Detector 180degree PIR (White)

Please Enquire EUR
Add to Cart
Motion Detector 180degree PIR (White)
  Manual override facility, with automatic re-set after 8 hrs
  Weatherproof housing - injection moulded ABS
  180? detection
  Adjustable time delay (10 secs - 4 mins)
  Max 1000W tungsten or 300W fluorescent
  Light sensitivity: 30 lux adjustable
  Minimum load 25W
Read more »

Recessed Presence Detector 360degree PIR, white

Please Enquire EUR
Add to Cart
Recessed Presence Detector 360degree PIR, white
  Energy saving light control
  Adjustable time delay (5secs-15 mins)
  Injection moulded, flame retardant ABS housing
  Max 1000W tungsten or 300W fluorescent
  5m range over
Read more »

Presence Detector 360degree PIR, white

Please Enquire EUR
Add to Cart
Presence Detector 360degree PIR, white
  Energy saving light control
  Switches off lights automatically when you leave the room
  5m range
  360degree motion detector
  Adjustable time delay (5secs-15 mins) and light level control
  Injection moulded ABS housing
  Max 1000W tungsten or 300W fluorescent
Read more »

2 Gang 2 Way Dimmer Switch, 250W

Please Enquire EUR
Add to Cart
2 Gang 2 Way Dimmer Switch, 250W
  Push on/off operation
  Bakelite resin front plates in white RAL9010 finish
  Conforms to British standards
  Dimmers (leading edge type) for incandescent lighting (resistive loads) - such as filament mains voltage lamps or and electronic transformers for MR16
  Screws included
  Energy saving
Read more »

1 Gang 2 Way Dimmer Switch, 1000W

Please Enquire EUR
Add to Cart
1 Gang 2 Way Dimmer Switch, 1000W
  Push on/off operation
  Bakelite resin front plates in white RAL9010 finish
  Conforms to British standards
  Dimmers (leading edge type) for incandescent lighting (resistive loads) - such as filament mains voltage lamps or and electronic transformers for MR16
  Screws included
  Energy saving
Read more »

Uni-Grid Dimmers (500W)

Please Enquire EUR
Add to Cart
Uni-Grid Dimmers (500W)
  All uni-grids will suit MK (logic and grid plus), MEM, Wandsworth or Crabtree grid systems
  Soft start
  Push on/off operation
  Surge and overload protection
  Richmond grid dimmers fit any position including side by side
  RSB protected
  Fits standard 41mm depth box
  Richmond recommend that where resistive type dimmers are used with electronic transformers or mains voltage tungsten halogen lamps that the maximum wattage allowed is 20% less than that stated on dimmer
  Richmond dimmers are manufactured in the UK and conform to all British Standards. Performance and quality guaranteed
  Note: UNI400T optimised for use with wire wound transformer for low voltage lighting. For use with electronic transformers - UNI500 and UNI700
Read more »

Uni-Grid Dimmers (400W)

Please Enquire EUR
Add to Cart
Uni-Grid Dimmers (400W)
  All uni-grids will suit MK (logic and grid plus), MEM, Wandsworth or Crabtree grid systems
  Soft start
  Push on/off operation
  Surge and overload protection
  Richmond grid dimmers fit any position including side by side
  RSB protected
  Fits standard 41mm depth box
  Richmond recommend that where resistive type dimmers are used with electronic transformers or mains voltage tungsten halogen lamps that the maximum wattage allowed is 20% less than that stated on dimmer
  Richmond dimmers are manufactured in the UK and conform to all British Standards. Performance and quality guaranteed
  Note: UNI400T optimised for use with wire wound transformer for low voltage lighting. For use with electronic transformers - UNI500 and UNI700
Read more »

IP68 35 - 105W Submersible Electronic Transformer

Please Enquire EUR
Add to Cart
IP68 35 - 105W Submersible Electronic Transformer
  IP68 - submersible up to 2m
  12V power supply for MR16
  C/w 1950mm flying leads
  Integral short circuit protection
  Radio interference suppressed
  Safety & performance in accordance with EN61347-2-2
  Injection moulded ABS housing
Read more »

12V 70 / 105VA Dimmable Electronic Transformer c/w Earth Loop Terminal (105W)

Please Enquire EUR
Add to Cart
12V 70 / 105VA Dimmable Electronic Transformer c/w Earth Loop Terminal (105W)
  12V Power supply for MR16 lamps
  Injection moulded ABS housing
  Large mains terminals for loop in & loop out - no need for junction box (including earth terminal looping point)
  Pre-heat soft start function for input voltage surge protection
  Integral in-line fuse - ensures complete safety at end of life
  Thermal fuse - ensures safe failure if in excess of ambient temperature
  Radio interference suppression in accordance with EN55015
  Safety and performance in accordance with EN61046
  In case of short circuit and overload, the unit shall automatically reset when fault is removed
  3 x 1.5mm T&E cables
Read more »

12V IP65 Dimmable Electronic Transformer (20-105W)

Please Enquire EUR
Add to Cart
12V IP65 Dimmable Electronic Transformer (20-105W)

 

  12V power supply for MR16 lamps
  Injection moulded PBT housing Dimmable with standard dimmers
  C/w 400m mains voltage primary leads & 400m 12V secondary leads
  Pre-heat soft-start function for input voltage surge protection
  Integral In-line fuse to ensure complete safety at end of life
  Thermal fuse - ensures safe failure if in excess of ambient temperature
  Radio interference suppression in accordance with EN55015
  Safety & performance in accordance with EN61347-22
  IP65, suitable for outdoor use when mounted vertically, cables facing down
Read more »

12V, 20-60W Dimmable Electronic Transformer

Please Enquire EUR
Add to Cart
12V, 20-60W Dimmable Electronic Transformer
  C/w 250mm flying leads
  Dimmable with standard dimmers
  Integral thermal fuse to ensure safety
  No reset function (thermal protection 125?C)
  Integral radio interference suppression
  Safety & performance in accordance with EN61347-2-2
Read more »

12V 35-150W Electronic Transformer

Please Enquire EUR
Add to Cart
12V 35-150W Electronic Transformer
  Flat profile, suitable for furniture
  Radio interference suppression
  Safety & performance in accordance with EN61347-2-2
  Large mains terminal for loop in & loop out - no need for junction box
  Dimmable
  3 x 1.5mm T&E cables
Read more »